Wisconsin UST Class C Operator Training
Last Updated 09/2021
English
30-Day Money Back Guarantee
Full Lifetime Access
Finish in
30 min! Run Time
30 min! Run Time
Made for for
Employees
only
Employees
only
No Certificate
Provided
Provided
Mobile -
Friendly
Access
Friendly
Access
What you'll learn
Chapter 1 - Facility Overview - This chapter provides a basic overview of the primary components of a typical UST facility. These components include the USTs, manways, spill buckets, fuel dispensers, and dispenser nozzles.
Chapter 2 - Monitoring - This chapter emphasizes the components used to monitor a UST facility. Students will learn what an Automatic Tank Gauge (ATG) is and does, how to interpret its alarms and warnings, and what to do in case of an alarm. The role of line leak detectors is also discussed.
Chapter 3 - Environmental - In this chapter, students learn about sensitive receptors, or places where a fuel spill may leave the facility and enter the environment. The chapter also introduces students to the spill kit and its contents, and how to use spill kit components to contain spills threatening sensitive receptors like curb breaks and drains.
Chapter 4 - Fueling Rules - The focus of this chapter is fuel delivery safety. Students will watch a short video on proper fueling procedures. Students also learn about hazards at the fueling point, including smoking, static electricity, leaving a vehicle unattended while fueling, and leaving a vehicle running while fueling.
Chapter 5 - Delivery Procedures - This chapter teaches the student how to supervise a fuel delivery and monitor for problems during a fuel delivery. Additional emphasis is placed on the ATG and on overfill prevention devices like overfill prevention valves and ball float valves. Delivery prohibitions are also addressed.
Chapter 6 - Safety - This chapter covers safety information every Class C Operator needs to respond to emergencies. Included here is a video explaining when and how to use a fire extinguisher. The Emergency Stop and All Stop buttons are identified and discussed.
Chapter 7 - Emergency Situations - This chapter discusses common emergency situations and proper responses to them, including what to do if a vehicle leaves the facility with the nozzle still in the vehicle's fuel spout. Managing customer traffic in the event of a spill is also covered. Correct fire extinguisher operation is reviewed.
Chapter 8 - Orientation Checklist - This orientation is to be performed by a manager or Class A/B operator at the Class C operator's facility. It will familiarize the trainee with the various site-specific components of the facility and relate them to the content discussed in the PASS UST Class C Operator Training Course.
Description
Wisconsin Class C operators are the frontline responders at underground storage tank sites. This course prepares them to handle the first minutes of an emergency.
What this course covers:
- Recognizing alarms, gauges, and warning indicators
- First response to spills, overfills, and releases
- Seven short chapters, each with a quick quiz
- Completing the on-site Orientation Checklist during a facility tour
Learners finish in about 30 minutes, then complete the checklist with a manager or Class B operator before printing the Wisconsin Class C certificate.
System Requirements
See System Requirements in the Coggno Knowledge Base
Table of Contents
Chapter 1 - Facility Overview
Chapter 2 - Monitoring
Chapter 3 - Environmental
Chapter 4 - Fueling Rules
Chapter 5 - Delivery Procedures
Chapter 6 - Safety
Chapter 7 - Emergency Situations
Chapter 8 - Orientation Checklist
Frequently Asked Questions
This course is designed for employees who need to complete Wisconsin UST Class C Operator Training training
Yes. This course is designed to meet applicable federal requirements and commonly mandated state standards. Always confirm specific state or industry requirements with your local regulations.
The course takes approximately 30 minutes to complete and can be paused and resumed at any time.
Yes. Learners receive a downloadable certificate upon successful completion, which can be used for compliance records and audits.
Yes. You can assign this course to individuals or groups using Coggno’s LMS, or purchase multiple seats for your team.
Yes. This course can be exported for delivery in most learning management systems (SCORM compatible).
Yes. The course is fully self-paced and available 24/7.
Yes. This course includes a knowledge check to reinforce learning and verify completion.
Learners have lifetime access from the date of purchase.
Yes. A preview is available so you can review the course format and content before purchasing.
Yes. Content is reviewed and updated as regulations and best practices change.
No. This course is not included with the Prime Subscription and must be purchased separately.
Yes. Refund requests can be submitted within 30 days of purchase.
OSHA Compliance
- Bloodborne Pathogens Training (21)
- Electrical Safety (73)
- Fire Safety Training (50)
- First Aid Training (34)
- Forklift Training (45)
- HazCom (Hazard Communication) (51)
- Lockout/Tagout (LOTO) (24)
- OSHA 10 Hour Training (6)
- OSHA 30 Hour Training (2)
- PPE (Personal Protective Equipment) (65)
- Slips, Trips & Falls (72)
- Workplace Safety (1001)